Add Device to Guarding vision from iVMS4200

Add Device to Guarding vision from iVMS4200

Add a Device to Guarding Vision from iVMS4200

Step 1: Goto “Device Management” on iVMS and select the device.

Step2: Now click on “Remote Configuration”.

Step3: In the remote configuration page, click on “+” next to “Network” and select “Hik-Connect”.

Step4: Check “Enable Hik-Connect” and enter a desired verification code.

(Note: Check “View Licenses” option to view and double check the verification code you created)

Step 5: Now, go to Event  Motion Detection  Check “Notify Surveillance Center”. This will let your guarding vision app show notifications when there is a motion event.

(Note: This step can be done for the other events listed below the “Motion Detection”)

Step6: Install the “Guarding vision” App on your mobile device and create a login account.

Step7: To add the device to you guarding vision, click on the “+” on the top right corner of the App and select the QR Code.

(Note: Proceed to next step to find the “QR Code”.)

Step8: Select the device from the device list and click on QR Code. Use this QR code to add device to your guarding vision.

    • Related Articles

    • Add Stand alone device to Guarding Vision

                                               Adding a Stand Alone IP Camera to Guarding Vision App Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access  Step 2: Check the “Enable ...
    • Add Guarding Vision Device to CMS/Guarding Vision Lite Windows Application

                                             Add and View Guarding Vision device on CMS Lite/Guarding Vision Lite Windows Application Purpose:  This document provides steps to add and view your devices remotely by using the CMS Lite Application. Step to ...
    • Add Device with Static IP into Guarding Vision for Local Access

                              Add IP Camera to Guarding Vision with Static IP Address Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App. Note:  Method 1: Adding an online ...
    • Reset device with Guarding Vision

                    Reset NVR using Guarding Vision Purpose:  The purpose of this document is to be able to reset an NVR with the vuarding vision account. Currently Supported HINO devices:  NVR532P16-I4 NVR516P16-I4 NVR732-I8 NVR764-I8 Required Firmware:  ...
    • Guarding Vision Quick Setup

              Guarding Vision Setup Instructions Setting up the DVR/NVR Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network. Step 2: Under “General” input the “Preferred DNS Server” as as shown in the figure below.(If ...