Add Stand alone device to Guarding Vision

Add Stand alone device to Guarding Vision


 

 

 



                                   Adding a Stand Alone IP Camera to Guarding Vision App















Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access 


Step 2: Check the “Enable Option” you will see a pop-up window asking to create a verification code. Enter the desired verification code and click “OK”


Step 3: You can view the verification code by clicking on the eye lid icon.

Step 4: Click “Save” and refresh the page. The status should turn from offline to online.



Step 5: Now you can add the device into guarding vision by entering the las 9 digits of the serial number which can be viewed by going in to 

Configuration  System  System Settings.












Step 6: Open the guarding vision app on your mobile device and register for a new account.


Step 7: Click on the ‘+’ sign on the top right corner of the app and select manual add for serial number or QR code to scan the QR code on the device sticker

(Note: Playback can be viewed on the App for IP Cameras that support Micro SD Card)

                                               www.hinovision.com                                  Office:  469-444-2999



    • Related Articles

    • Add Device to Guarding vision from iVMS4200

      Add a Device to Guarding Vision from iVMS4200 Step 1: Goto “Device Management” on iVMS and select the device. Step2: Now click on “Remote Configuration”. Step3: In the remote configuration page, click on “+” next to “Network” and select ...

    • Add Guarding Vision Device to CMS/Guarding Vision Lite Windows Application

                                             Add and View Guarding Vision device on CMS Lite/Guarding Vision Lite Windows Application Purpose:  This document provides steps to add and view your devices remotely by using the CMS Lite Application. Step to ...

    • Add Device with Static IP into Guarding Vision for Local Access

                              Add IP Camera to Guarding Vision with Static IP Address Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App. Note:  Method 1: Adding an online ...

    • Reset device with Guarding Vision

                    Reset NVR using Guarding Vision Purpose:  The purpose of this document is to be able to reset an NVR with the vuarding vision account. Currently Supported HINO devices:  NVR532P16-I4 NVR516P16-I4 NVR732-I8 NVR764-I8 Required Firmware:  ...

    • Guarding Vision Quick Setup

              Guarding Vision Setup Instructions Setting up the DVR/NVR Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network. Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If ...