Related Articles
Batch Upgrade
Batch Upgrade IP Camera with Batch Configuration Tool Purpose: This document provides step by steps instructions on using the Batch upgrade tool for upgrading the IP Cameras. (Note: The following steps are applicable ...
Batch Configuration User Manual
Click here to view the manual.
SADP Tool for MAC
Click here to download the SADP Tool for MAC.
Using SADP tool
Step 1: Install the SADP Tool Application Step 2: Make sure that the computer/laptop is in the same network as the IP Cameras/NVR/DVR. Step 3: The SADP application will list the “Inactive” devices connected to the switch as shown in the figure below. ...
Access IP Camera Configuration from NVR Web GUI
Access IP Camera Configuration From NVR Purpose: To be able to access IP cameras connected to an NVR from the NVRs web client. Note: Before we start make sure the computer and the NVR are in the same network Enable the virtual host: Open ...