Convert File using VLC
Step 1: Open VLC Player and go to Media Convert/Save. You will be taken to “Open Media” window
Step 2: In the “Open Media” window
- Click on “+Add” button to browse and select the video file you need to convert.
- The “Convert/Save” button will be Highlighted. Click on the “Convert/Save” button to go to the next page.
Step 3: For the “Profile” option select “ video – WMV +WMA (ASF)”
- Click “Browse” to select destination
- Click “OK”
- Click “Start” to convert the file
- The saved file should play with windows media player.
Related Articles
Using SADP tool
Step 1: Install the SADP Tool Application Step 2: Make sure that the computer/laptop is in the same network as the IP Cameras/NVR/DVR. Step 3: The SADP application will list the “Inactive” devices connected to the switch as shown in the figure below. ...Merge Files on VSPlayer
Merge Multiple Video Files into a Single Video file Using VSPlayer Purpose: This document shows how to merge multiple downloaded footage files into a single video file using VSPlayer. Before proceeding with the steps, download the VSPlayer ...SADP Reset Process
Reset Device password using SADP Tool (Note: Do not disconnect or power off the recorder or cameras till the process is finished) Download SADP Tool: https://app.box.com/s/mzbh5zeka0psff86gwqe0838pp6ym8bz Step 1: Select the desired device by ...Password Recovery Methods for NVR and DVR
Method 1: Reset device using SADP Tool Step 1: Select the desired device by clicking on the check box next to the device name. Now, click on “Forgot Password” option on the bottom right corner. This will open the “Reset Password” window. Step 2: In ...Batch Upgrade
Batch Upgrade IP Camera with Batch Configuration Tool Purpose: This document provides step by steps instructions on using the Batch upgrade tool for upgrading the IP Cameras. (Note: The following steps are applicable ...