Guarding vision Setup from browser (www guardingvision com)

Guarding vision Setup from browser (www guardingvision com)

Step 1: Open browser (Internet explorer/Chrome) and input the address And click on “Register” to register for a new account. 

Step 2: In the registration page, input the mandatory credentials and select “Email” for registering with email or “Country Code” for registering by a phone number.

Step 3: Once the account is created, select “Device Management” and select “Add” to add a new device.

Step 4: In the “Add Device” pop-up window, input the device serial number (Last 9 digits of the serial number found on the device sticker) and click on “Search”.

Step 5: If the platform access is enabled on the device, then you should see the device on the “Add device” window. Click on the ‘+’ icon for the device. Click on the link for Enabling “Platform Access”

Step 6: Enter the verification code found on the platform access page of the device. Click “Add”. 

Step 7: Click “OK”. Now the device should be added into the Guarding vision account. To view video stream, download the Guarding vision ass on your mobile phone and login with the account credentials just created.

Sharing the device:

To share the device with another Guarding vision account, click on the “Share” icon next to the device name

Select “Email” for sharing by email or select “Mobile Phone Number” to share by mobile number. Click on the check mark next to the device and click “Share”.

    • Related Articles

    • Guarding Vision Quick Setup

              Guarding Vision Setup Instructions Setting up the DVR/NVR Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network. Step 2: Under “General” input the “Preferred DNS Server” as as shown in the figure below.(If ...
    • Initialize/Setup SD Card from Guarding Vision App

                                           SD Card Setup for IP Camera from Guarding Vision Purpose: This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.  (Note: When a brand new SD Card is ...
    • Reset device with Guarding Vision

                    Reset NVR using Guarding Vision Purpose:  The purpose of this document is to be able to reset an NVR with the vuarding vision account. Currently Supported HINO devices:  NVR532P16-I4 NVR516P16-I4 NVR732-I8 NVR764-I8 Required Firmware:  ...
    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...
    • Add Stand alone device to Guarding Vision

                                               Adding a Stand Alone IP Camera to Guarding Vision App Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access  Step 2: Check the “Enable ...