How do I install Hard Drives to NVR?

How do I install Hard Drives to NVR?

Steps to Install Hard Drive on NVR

  1. Remove the NVR cover by unscrew 8 screws on back and side panel.
  2. Connect the Power and SATA cables to NVR logic board; Cables are included in the accessary box.
  3. Connect Power and SATA cable to HDD.
  4. Align the HDD to the mounting points and fasten the screws from the bottom panel.
  5. Reinstall the cover.   

    • Related Articles

    • How to access NVR web interface

      How to Access NVR Web Interface May. 25th, 2018 Ver.1.0 You can access NVR/DVR web interface and perform live view, play back and configuration. To access the web interface, please follow the steps listed bleow: Go to NVR menu and then configuration ...
    • How to configure POS Connection for NVR

      How to configure  POS Connection for NVR? Hinovision 5 Series and 7 Series NVR/DVRs support Point of Sale (POS) system integration. This tutorial will demonstrate how to retrieve POS data from Network with Hinovision iVMS-Pro client software. Once ...
    • Activate Device with SADP and Add to NVR over Network

            Activate IP Camera with SADP and Add IP Camera to NVR over the Network Step 1: Install the SADP Application from the link below. Step 2: Make sure that either the computer/laptop is in the ...
    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...
    • Setup RTSP on NVR

        Step 1: On the NVR, right click and select Menu  Camera to open the the “Camera Management” page. Step 2: Click on the notepad icon under edit for the channel you wish to add/edit the camera to open the “Edit IP Camera” page. Click on “Protocol”   ...