Reset device with Guarding Vision

Reset device with Guarding Vision


 

 

 

 

      Reset NVR using Guarding Vision


















Purpose: 

The purpose of this document is to be able to reset an NVR with the vuarding vision account.

Currently Supported HINO devices: 

NVR532P16-I4

NVR516P16-I4

NVR732-I8

NVR764-I8

Required Firmware: 

V4.1.65 or above

Initial setup for enabling Password reset from Guarding Vision

Step 1: During the initial device setup, make sure the “Reserved Email Settings” option is checked.





Step 2: Since the Reserved email settings option is enabled, the following screen as shown in the figure below should appear. Input the email that you wish to receive a password reset verification code.

(Note: Please enter a valid email)





Resetting password from the Guarding Vision App

Step 1: On the NVR login screen, click on “Forgot Password”


Step 2: On the following screen as shown in figure below, select “Verify by Reserved Email” and click “OK”


Step 3: You will be brought to a screen with QR Code.




Step 4: Open the Guarding vision App on your phone and go to More  Reset Device Password.





Step 5: Scan the QR Code shown on the NVR screen. You should see a message as shown in the figure below.


Step 6: Check your email to find the verification code and enter the code in the field provided and click on “OK”.



(Note: For more support call +1 (469) 444-2999x2 or email support@hinovision.com)

                                               www.hinovision.com                                  Office:  469-444-2999




    • Related Articles

    • Add Device to Guarding vision from iVMS4200

      Add a Device to Guarding Vision from iVMS4200 Step 1: Goto “Device Management” on iVMS and select the device. Step2: Now click on “Remote Configuration”. Step3: In the remote configuration page, click on “+” next to “Network” and select ...

    • Add Stand alone device to Guarding Vision

                                               Adding a Stand Alone IP Camera to Guarding Vision App Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access  Step 2: Check the “Enable ...

    • Unbind Device

      Unbind NVR/DVR/IP Camera Note: Performing the below methods for unbinding will require the device login password. If you do not have the password, click the following link:  SADP Reset Process (hinovision.com) Method 1: Using the Guarding Vision App ...

    • Add Guarding Vision Device to CMS/Guarding Vision Lite Windows Application

                                             Add and View Guarding Vision device on CMS Lite/Guarding Vision Lite Windows Application Purpose:  This document provides steps to add and view your devices remotely by using the CMS Lite Application. Step to ...

    • Guarding Vision Quick Setup

              Guarding Vision Setup Instructions Setting up the DVR/NVR Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network. Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If ...