Setup RTSP on NVR

 

Step 1: On the NVR, right click and select Menu  Camera to open the the “Camera Management” page.

Step 2: Click on the notepad icon under edit for the channel you wish to add/edit the camera to open the “Edit IP Camera” page. Click on “Protocol”

 

Step 3: In the “Protocol Management” page, select “RTSP” for “Type”. Enter the RTSP path. Click “Apply”. Click “OK”.

​

• Related Articles

• How to Configure Device Startup Wizard on Hinovision NVRDVR

  How to  Configure Device Startup Wizard on Hinovision NVR/DVR? Ver.1.0 Startup wizard helps you configure device basic settings quickly during the device initial boot. Please follow the steps listed below for the wizard configuration. Setup device ...

• How to configure DDNS on Hinovision NVR

  How to Configure SimpleDDNS on  Hinovision NVR? Hinovision Technical Team Ver.1.0 Hinovision NVR supports multiple popular DDNS such as DynDNS and No-IP, in addition it also supports SimpleDDNS which provides exclusive free service for Hinovision ...

• How to configure DDNS on Hinovision NVR

  How to Configure SimpleDDNS on  Hinovision NVR? Hinovision NVR supports multiple popular DDNS such as DynDNS and No-IP, in addition it also supports SimpleDDNS which provides exclusive free service for Hinovision products. Once the DDNS is configured ...

• Access IP Camera Connected to NVR on SADP

          Access IP Camera from NVR on SADP   Purpose: This document provides steps to access the Plug and Play IP Camera from the NVR on the SADP. Connection Setup: Unplug the network connection from the LAN of the NVR and plug it into one of the PoE ...

• Password Recovery Methods for NVR and DVR

  Method 1: Reset device using SADP Tool Step 1: Select the desired device by clicking on the check box next to the device name. Now, click on “Forgot Password” option on the bottom right corner. This will open the “Reset Password” window. Step 2: In ...