Snap Shot setup on IP Camera

Snap Shot setup on IP Camera

(Note: The IP Camera will need a SD Card installed to store and retrieve the snapshot images)

Step 1: Storage  Schedule setting  Capture  Capture Schedule  Setup the schedule time  Save

Step 2: Storage  Schedule Setting  Capture  Capture parameters  Check “Enable timing snapshot”  Set the Interval  Save

Step 3: Go to Picture   Search  to view the captured file

    • Related Articles

    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...
    • Configure Live streaming for IP Camera

      Configure Hinovision Live Streaming Cameras  for YouTube and Facebook Live Stream Hinovision Live Streaming Cameras supports RTMP protocol. It provides all the hardware and software you need to achieve YouTube and Facebook Live stream in a single ...
    • Access IP Camera Connected to NVR on SADP

              Access IP Camera from NVR on SADP   Purpose: This document provides steps to access the Plug and Play IP Camera from the NVR on the SADP. Connection Setup: Unplug the network connection from the LAN of the NVR and plug it into one of the PoE ...
    • Access IP Camera Web Interface from NVR

      Access IP Camera Web Interface from NVR Web Interface   Step 1: Connect the NVR to the router or network switch. Step 2: Connect your PC/MAC to the same network as the NVR. Step 2: Find the IP address of the NVR. This can be done following ways: -    ...
    • Add Port Forwarded IP Camera to NVR

      Step 1: Access the camera using the “SADP Tool” application and assign a static IP address. Step 2: Login to the camera from browser(IE Preferred) with IP address and assign port numbers. To access the port page, go to Configuration --> Network ...