Steps for IPV4 setup on Win&MAC

Steps for IPV4 setup on Win&MAC


Steps for configuring IPV4 on MAC

  1. From the Apple menu, select System Preferences.
  2. Select Network. The window shown below appears.


  1. From the sidebar, select an active network interface. In this example, I'm connected to a wireless network, so I'll select Wi-Fi.
  2. Make a note of the current IP address assigned to your Mac. You'll need to select a new IP address from within the private IP address range listed. More on that in a minute.
  3. Click Advanced.
  4. Select TCP/IP. The window shown below appears.


  1. From the Configure IPv4 menu, select Manually.
  2. Enter a static IP address in the IPv4 Address field. 
  3. Click OK.
  4. Click Apply.









Steps for confihuring IPV4 settings on windows


Goto Settings

















Selec Network & Internet


Select “Network and Sharing Center”




Select “Change adapter settings”


Right click on “Ethernet” select “Properties”





Select “Internet Protocol Version 4” Click on “Properties”


Input the “IP Address” “Subnet mask” and “Default Gateway”. Click “OK”


Right Click on Wi-Fi and select “Disable”




    • Related Articles

    • SADP Tool for MAC

      Click here to download the SADP Tool for MAC.
    • Guarding Vision for MAC V2.0.0.14 build20210122

      Please download Guarding Vision for MAC V2.0.0.14 build20210122 from the link below https://app.box.com/s/q4g6xg0rle9s6xjchmoh412nvhz959qg
    • Guarding Vision for MAC_v2.0.0.15build20230901

      Please download Guarding Vision for MAC from the link below v2.0.0.15build20230901 https://drive.google.com/file/d/1TtLZxwLmx449sI1rJ0LAPF7mWh0-4NFW/view?usp=sharing
    • Snap Shot setup on IP Camera

      (Note: The IP Camera will need a SD Card installed to store and retrieve the snapshot images) Step 1: Storage  Schedule setting  Capture  Capture Schedule  Setup the schedule time  Save Step 2: Storage  Schedule Setting  Capture  Capture ...
    • iVMS Playback Steps

      Step1: Open the iVMS application and select “Control Panel” Step2: Under Control panel, select “Remote Playback” Step3: From the list of IP Cameras on the left, drag and drop the camera into one of the view to start the playback for the camera.